How To Fix A Tight Waistband

Download Commodity

Download Article

If you have a piece of wearable that just doesn't seem to be fitting right because of the tight elastic, you tin make some quick adjustments to ameliorate them for you. Luckily, you tin make these adjustments without the utilize of a sewing auto. You tin can either stretch the elastic plenty so that they fit comfortably, or yous tin entirely remove the elastic.

1. 1

   Plough on the iron and dampen a cloth. Y'all want your iron on and set to the highest setting. Run a confront fabric or manus towel nether h2o until it is damp, but non soaked.

2. 

   2

   Ready your pants. You tin can either pivot each side of your pants to the ironing board—stretched to the desired length. Or, you lot tin simply slide the pants around the ironing lath until they are the proper width.

   Ad

3. 

   3

   Place the damp material over your elastic. Make sure it completely covers the elastic that you're trying to stretch out. If needed, utilize two cloths.

4. 

   four

   Fe the elastic. With the damp cloth on top of your elastic band and your iron on the highest setting, iron over it. Fe for 10 seconds and so let sit for ten seconds. Continue doing so for 5-x minutes. This will aid your pants fit because as the rubberband heats, it will heightens the breaking weight. This means that it will be able to stretch more than before reaching its limit.^[ane]

5. 

   v

   Repeat as necessary. If information technology hasn't' stretch plenty, try flipping your rubberband ring and repeat the process. Practice so until you accomplish your desired fit.^[2]

Advertising

1. 1

   Observe a chair. If you have a chair that is the right size to stretch the elastic, that volition work perfectly. If you don't have a chair that'southward the right size, you tin try using the side of a small table, an empty drawer, or an empty poster frame.

2. 

   2

   Stretch your rubberband wearable over your chair. If you can, line up the sides with the side of the chair. This will help stretch the elastic evenly.

3. 3

   Let information technology sit. Let your rubberband sit, being stretched, for 24 hours. If the desired size still isn't reached, put the rubberband dorsum in the stretched position and go out it for several days. Leave it in a warm place to help the elastic band stretch.^[3]

Advertisement

1. 

   i

   Turn the clothing inside out. This will get in much easier to work with. Plus, you will exist less likely to make an mistake with your scissors if you can see what you lot're doing.

2. 

   ii

   Find the inside seam. Sometimes, elastics are sewn into the seam of clothing. If this is the instance, y'all won't be able to pull the rubberband out of them if you cut the somewhere other than the seam. Find the seam by holding on ane side of the seam and stretching the other side. If you experience the elastic shift, you are gratuitous to cut wherever you'd similar. If y'all experience it snag at the seam, make sure to cut hither.

3. 

   3

   Put a minor slit on the inside of you wear. To remove the elastic ring from your clothing, make a slit (effectually ½"). If the rubberband is sewn into the seam, y'all'll have to cut the seam the size of the elastic.^[four]

4. 

   4

   Cutting the elastic. Use pair of scissors to go through your slit and cut the rubberband. Cutting through the unabridged elastic without cutting whatsoever more holes in your wearing apparel.^[v]

5. 

   five

   Pull the elastic out. If y'all want to still be able to tie the pants snugly, affix a long shoelace or ribbon to one end of the rubberband using a safety pin. When you pull out the rubberband, pull on the cease without the ribbon. This will guide your new tie through the waistband. If y'all do not want a necktie, and so just slowly pull the elastic out, existence careful not to catch a lose string and bunch your cloth. In one case the elastic is out/replaced, your clothes are set up to wear.

   • Yous can sew the slit closed if you want to, merely information technology's not a necessary step before yous wear your wearing apparel.

Advertisement

Add New Question

• Question

  Is in that location any mode to stretch elastic?

  

  Chloée Ohayon-Crosby is a Costume Designer and Wardrobe Specialist in Los Angeles, California. With over 8 years of experience in fashion consulting, Chloée specializes in personal, film, theater, and commercial styling as well equally image consulting and costume design. Chloée has worked equally an assistant designer for the distinguished fashion house Chloée and as a freelance stylist with Glamour Italian republic. Chloée studied Fine/Studio Arts at the Ecole Nationale Supérieure des Beaux-Arts and Mode Blueprint and Merchandising at the world renowned ESMOD École Supérieure des Arts in Paris, French republic.

  

  Costume Designer & Wardrobe Specialist

  Expert Answer

  Yes, for a quick set I would take a pair of scissors and make very pocket-sized snips here and there effectually the waist where the rubberband is situated. That should allow the fabric to loosen upward.

• Question

  Tin can I stretch the rubberband of my socks?

  

  Yep, you may stretch the rubberband in your socks following the aforementioned steps here.

• Question

  How exercise I stretch the elastic in the waist of my jacket?

  

  Having the jacket zipped closed (if it's a zipper jacket) and post-obit any of these methods will stretch the elastic.

See more answers

Inquire a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertising

• If y'all'd rather not remove the entire band, make pocket-size snips around the waistline where the elastic is. This volition help the material relax a bit.^[six]

• If you're not comfortable with an at-home mode to stretch out the elastic, find a tailor or seamstress to assist you.

Advertising

Near This Article

Article Summary 10

To accept the stretch out of an rubberband in clothing, get-go by stretching the elastic and pinning it to an ironing lath so it stays stretched out. So, identify a damp cloth over the elastic and set your atomic number 26 to the highest setting. In one case the iron is hot, fe over the clammy cloth and elastic, pressing the iron downwards for ten seconds and and then removing it for 10 seconds. Repeat for v-10 minutes or until the elastic fits. To learn how to take the stretch out of rubberband using simply a chair, scroll down!

Did this summary help you?

Thanks to all authors for creating a page that has been read 665,587 times.

Did this article help you?

Source: https://www.wikihow.com/Take-the-Stretch-Out-of-an-Elastic-in-Clothing

Share this post